OVERVIEW The Visionary Move Mobile Magnetic Glass Board offers up to twice the functional space of a wall-mounted board in a versatile and stylish mobile unit. BOARD The double sided magnetic glass panel comes in two sizes, 47.24”H x 35.43”W and 47.24”H x 70.87”W. Boards are made of 0.15” thick, tempered glass. Boards are available in gloss white, gloss black, low-iron white, red, orange, yellow, green, blue, and navy. Visionary glass boards are backed with 20 Ga steel to allow for the attachment of rare earth magnets. FRAME The Visionary Move Mobile Magnetic Glass Board has a frame of white or silver powder coated steel. The two uprights are 18 Ga 2.4” x 1.2” steel tube, 55.25” long, and are held together by four M6 x 50mm screws into a 2.4” x 1.2” crossbar and four M6 x 50mm screws into an 18 Ga 1” square steel tube, concealed behind the markerboard panels along the edge. Doublesided foam adhesive strips placed along the markerboard-facing sides of this interior tube assist in holding the glassboard to the frame. The 18 Ga steel top panel and 18 Ga steel tray that cover the width of the boards also hold the markerboard in place and are attached to the interior steel tube by six M6 x 50mm screws in the 47.24”H x 70.87”W version and with four M6 x 50mm screws in the 47.24”H x 35.43”W version. The steel tray extends 2.375” from the surface of the markerboard on both sides. The two feet are made of 18 Ga 2.4” x 1.2” steel tube, 26.5” long and are welded to the uprights. The uprights and feet have plastic push-in end caps. The frame is attached to four 3” casters with M10 x 19mm stems. The crossbar sits 7” above the ground while on casters